Stop Overpaying for KHS Replacement Lamps
Look, you don’t have to stick with the expensive OEM parts just because that’s how it’s always been done. We’ve spent a lot of time making sure our infrared lamps just work. They’re designed as direct swaps that fit about 95% of the blowing equipment out there. The trick is in the heat. If you don’t get the temperature exactly right, you’re in trouble. Too low, and your cycle times crawl. Too high, and you’ll scorch the surface of your PET preforms. It’s a tight window. That’s why we obsess over the wattage density and voltage—usually 230V or 400V—to match whatever power rails you’re already running. We also make sure the length and diameter are spot on. If the lamp doesn’t sit perfectly flush in the reflector, you’re wasting heat. And in this business, wasted heat is wasted money. Built for the grind Production lines aren’t gentle. They vibrate. They get hot. They’re loud. To handle that, we use heavy-wall quartz glass so the tubes don’t bow when things get intense. We stick with R7s or Sk15 connectors because they’re the gold standard for a reason—they stay put even when the machine is screaming along at full speed. Plus, we offer special coatings. Instead of the heat just bouncing off the plastic, these coatings help the energy actually penetrate the material. Getting them installed The best part? You just wire them in. No hacking your circuitry, no weird adapters. It’s a straight swap. Just a heads-up: if you decide to push the wattage to squeeze out a faster cycle time, keep an eye on your cooling fans. More heat means more load on your oven’s airflow. If the fans can’t keep up, the ambient temperature climbs, and your lamps won’t last nearly as long. We keep these in stock and ready to ship. No more waiting weeks for a brand-name replacement while your line sits idle.